control [ad_1]
ABSTRACT.
This paper investigates the influence of coated stirrups on overlapped splice strength of epoxy coated deformed bars. Six (6) beams of length 2550mm 300mm with lapped splice bars in constant moment region were cast and tested. The beams where cast with 16mm high yield diameter bars for both compression and Tension zone, 8mm high yield stirrups were used over the lap splices.
The ultimate moment from the test were used to determine the stress developed in the bars. The ratios of the test bond stresses and bond stress values using the tensile reinforcement yield stress , were used for comparison of the parameter under investigation. Coated and uncoated Transverse reinforcement was found to increase the splice strength of epoxy coated deformed bars, but uncoated transverse reinforcement was found to increase the splice strength of epoxy coated bars more than coated transverse reinforcement.
[ad_2]
Purchase Detail
Hello, we’re glad you stopped by, you can download the complete project materials to this project with Abstract, Chapters 1 – 5, References and Appendix (Questionaire, Charts, etc) for N5000 ($15) only,
Please call 08111770269 or +2348059541956 to place an order or use the whatsapp button below to chat us up.
Bank details are stated below.
Bank: UBA
Account No: 1021412898
Account Name: Starnet Innovations Limited
The Blazingprojects Mobile App
Download and install the Blazingprojects Mobile App from Google Play to enjoy over 50,000 project topics and materials from 73 departments, completely offline (no internet needed) with the project topics updated Monthly, click here to install.
Recent Comments