[ad_1] ABSTRACT This seminar was carried out with the sole aim of knowing the effects of the action of soap and detergent on soil/dirty substance during washing. It was found out that soap and detergent…
Read More[ad_1] TABLE OF CONTENTS CHAPTER ONE 1.1 Background of the study/Introduction 1.2 Statement of Problem 1.3 Purpose of the Study 1.4 Scope of the Study 1.5 Significance of the Study 1.6 Definition of Term 1.7 …
Read More[ad_1] ABSTRACT This project was done to bring to lime light the appropriate method of solid waste handling, separation and utilization, in order to reduce the impact on the environment – environmental degradation. In this…
Read More[ad_1] ABSTRACT The sets of seizes with shaker which was fabricated and assembled in the Chemical Engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving…
Read More[ad_1] ABSTRACT Stabilized adhesive was developed and produced. The development was made by the production of samples of the adhesive with varied quantities of the active ingredients and the additives. From the various formulations made,…
Read More[ad_1] ABSTRACT This research work which is based on safety principles and practice in liquefied petroleum gas (LPG) environment. LPG which is a petroleum fraction produced by distillation of crude oil. It is a hugely…
Read More[ad_1] ABSTRACT A temperature control apparatus an “Armfield model was refurbished. The methodology employed were to detect the pulty parts of the equipment especially in the sump where leakages were observed. In the repair, the…
Read More[ad_1] ABSTRACT This research work was carried out on the development of aerosol insecticide using local raw material. This was made possible through careful and through review of some organic substances to obtain their various…
Read More[ad_1] ABSTRACT The steel-shelf was constructed at the mechanical Engineering workshop of the Institute. The first step taken in the fabrication of the shelf was the selection of the material suitable for the construction; mild…
Read More[ad_1] ABSTRACT After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out are located at the…
Read MoreBank: UBA
Account No: 1021412898
Account Name: Starnet Innovations Limited
USDT: Pay 20 USDT to TJuqbcZ1GVibKqUPcmeYPZxX1Gq2QS
WhatsApp us
Recent Comments