1. Home
  2. Mechanical Engineering

Category: Mechanical Engineering

The Effect Of Notches On The Strength Of Coir – Reinforced Cashew Nut Shell Resin Composite – Complete project material

[ad_1] ABSTRACT   The effect of notches on the strength of Coir – reinforced cashewnut shell resin composite was investigated. Composite laminateswith six different fibre contents (0,0,1, 0.2, 0.3, 0.4 and 0.5 volumefractions) were fabricated…

Read More

The Design And Fabrication Of Pressurized Kerosene Stove – Complete project material

[ad_1] CHAPTER ONE This project of fabrication of single face pressurized kerosene cooker is a copied design. It is a manually operated type of stove, which has the capacity of supplying heat energy at high…

Read More

Techno-Economic Analysis Of A Model Biogas Plant For Agricultural Applications; A Case Study Of The Concordia Farms Limited, Nonwa, Tai, Rivers State – Complete project material

[ad_1] ABSTRACT In this Project Report, an analysis of biogas technology as a very viable replacement for fossil fuel used in a farm is presented. Biogas  (70% CH4 and 30% CO2) which is a clean, economical,…

Read More

Sintering Characteristics Of Itakpe And Agbaja Iron Ore Concentrates Blends – Complete project material

[ad_1] ABSTRACT This research investigated the sintering characteristics of sinter blends produced fromAgbaja iron ore concentrate of high phosphorus (P2O5 = 1.50 – 2.14%) and low silicacontent and Itakpe iron ore concentrate of low phosphorus…

Read More

Simulation Of The Dispersion Patterns Of Gas Flare Emissions – Complete project material

[ad_1] CHAPTER ONE INTRODUCTION Industrialization is highly desirable for the sustenance of a nation’s economy and the enhancement of the citizenry’s well-being. In the face of its numerous benefits, industrialization is characterized by environmental problems,…

Read More

Production And Weld Joint Performance Evaluation Of Arc Welding Electrodes From Dana Rolling Mill Scales – Complete project material

[ad_1] ABSTRACT This study explored the possibility of producing Iron Oxide based arc welding electrodesusing mill scales from Dana rolling mill. The performance of the weld joints using theproduced electrodes and a foreign electrode was…

Read More

Production And Performance Evaluation Of Biodegradable Grease (Biogrease) From Balanites Aegyptiaca (Desert Date) Seed Oil – Complete project material

[ad_1] ABSTRACT This work focused on the production and testing of biodegradable grease from Balanites aegyptiaca seed kernel oil. This was carried out by extracting the oil from the seeds using solvent n-Hexane extraction and…

Read More

Performance Evaluation Of Different Materials As Chills In Sand Casting Of Aluminium Alloy – Complete project material

[ad_1] ABSTRACT This study has evaluated the effectiveness of metallic materials as chill in sand casting of aluminium alloy. Four plates of dimension 165mm x 80mm x10mm were cast using sand mould. Steel, copper and…

Read More

Optimum Main Equipment Replacement Time For The Power Plant In The Port Harcourt Refinery – Complete project material

[ad_1] ABSTRACT The optimum equipment replacement time for the power plant at the new Port Harcourt Refinery is presented. In this presentation, maintenance of the entire plant was treated wholistically and an availability model for…

Read More

RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER – MECHANICAL ENGINEERING Project Topics – Complete project topic

[ad_1] ABSTRACT In the mechanical Engineering department of institute of management and technology there and many machines but not all in are good shape or form. This may be due to inadequate maintenance, which is…

Read More