ABSTRACT

The steel-shelf was constructed at the mechanical Engineering workshop of the Institute.

The first step taken in the fabrication of the shelf was the selection of the material suitable for the construction; mild steel was chosen.

The construction has the following steps: drawing and dimensioning of the proposed steel – shelf, market surveying and procurement of the needed materials, marketing out and cutting of the material, welding, filling, and finally painting to prevent corrosion.  The dimension of the steel – shelf are:

1219.2mm height, 939.8mm width and 457.2mm breadth.

The purpose is to produce a steel shelf that will be economically cheap and can meet up to the standard in the market.

TABLE OF CONTENTS

CHAPTER ONE

INTRODUCTION

CHAPTER TWO

2.0         Literature review

2.1       History of the steel-shelf

2.2         Types of shelve                                                                                7

2.3         The design of shelf

2.4         Steel making

2.5         Comparism of wood and steel

2.6         Material of construction

2.7         Corrosion

2.8         Prevention of corrosion

2.9         Maintenance of shelf

CHAPTER THREE

3.1         Construction procedure

3.2         Description of the modern steel-shelf

3.3         Safety precaution

3.4         Observations

CHAPTER FOUR

4.1         Cost analysis

4.2         Discussion

4.3         Recommendation

4.4         Conclusion

References

CHAPTER ONE

INTRODUCTION

A steel shelf is a set of shelves made of steel with compartments and partitions where books or files and other reference materials are kept in the libraries.  It can be used to store chemicals and other laboratory equipments or apparatues in the laboratories.  It can also be used to store other valuable materials at home and industries.  When used in libraries for packing books it is called book shelf but if it is used in industries to store materials it is referred to as facility for storage.

A shelf can be made of wood, glass or metal (steel).  It could be dismountable or undismountable.  In consideration of some factors, we decided to design and fabricate an unddismountable steel shelf.  This undismountable steel-shelf has a longer life span and serve its purpose better than any other shelf.

Being undismountable, there will be no lose of parts as in dismountable ones.   Also, steel as a material of construction has advantage over wood which can be attached by termits; and glass which can easily be broken.

Though corrosion as a result of reaction of air (oxygen), moisture and chemicals do attack the surface of metals, painting of the steel was done in order to reduce or eliminate this problems of corrosion.  Considering the availability durability, quality and affordability of this steels, research or the engineering properties of the material was carried out.  Steel as a material of construction is the cheapest, the most common and the most versatile metal used in industries all over the world.  It can be cast; drawn, hot or cold; rolled; pressed, welded etc.

There are many grades of carbon steel which includes: low. Carbon steel (mild steel) that contains. (0.1 – 0.3)% of carbon.  It is of two types Black-mild steel and Bright-mild steel.  Another is medium carbon steel which contain (0.3 – 0.7)% of carbon and High Carbon steel that contain (0.7 – 1.5)% of carbon.

In our project, low carbon steel or wild steel was used because it is used for general Engineering purpose.  It has limited corrosion resistance, should not be used with dilute acids like sulphuric acid of less than 90% concentration.  Even for concentration above 90%, the use of steel is still imited to certain ranges of temperature defined in accordance with the chemicals in contact with the steel.  It does not all with stand hydrochoric, phosphoric or nitric acids irrespective of the level of temperature and concentration.

It can be used to store organic solvents and other similar chemicals.  It is non-hazardsous and resists termites.  This is the area in which cost of production was made by adopting some amendments with the aim of achieving the modern steel-shelf of a standard size.

Furthermore, to produce a quality and long lasting steel-shelf, the vartous parts were arranged and shaped, connected in such a way that it affords an efficient and economical solution to the construction problems.  The shelf was also fitted with rollers stands and stoppers for stability at any given point.  It was solidly welded for easy movement.  Infact, the steel-shelf was constructed to the teste of maintenance and durability.

GET THE COMPLETE PROJECT»

Do you need help? Talk to us right now: (+234) 8111770269, 08111770269 (Call/WhatsApp). Email: projects@blazingprojects.com. Disclaimer: Using this Service/Resources, You are allowed to use the original PDF or DOC model papers you will receive in the following ways:
1. As a research source for additional understanding on your research project topic.
2. As a research source for ideas on your own research work (if properly referenced).
3. For Proper paraphrasing (see your university definition of plagiarism and acceptable paraphrase)
4. Direct citing (if referenced properly)
Thank you so much for your respect to the authors copyright.

Related