Controllability And Stabilizability Of Linear Systems In Hilbert Spaces – Complete project material

[ad_1]

TABLE OF CONTENTS

 

Acknowledgement ii
1 Introduction 1
1.1 Finite dimensional linear systems theory . . . . . . . . . . . . . . . . . . . . 2
1.2 Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Organization of the work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Spectral Theory and Semigroup Properties 7
2.1 Spectral Theory of Linear operators . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Semigroups of Linear operators . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.3 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3 Controllability and Stablizability in Hilbert Spaces 26
3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.2 Controllability in Hilbert Spaces . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.2.1 A General Framework for Linear Control Systems . . . . . . . . . . . 31
3.2.2 Various Concept of Controllability . . . . . . . . . . . . . . . . . . . . 33
3.3 Stability and Stablizability in Hilbert Spaces . . . . . . . . . . . . . . . . . . 41
3.4 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Bibliography 53

 

CHAPTER ONE

Introduction
Questions about controllability and stability arise in almost every dynamical system problem.
As a result, controllability and stability are one of the most extensively studied subjects in
system theory. A departure point of control theory is the dierential equation
x_ = f(x; u); x(0) = x0 2 Rn; (1.0.1)
with the right hand side depending on a parameter u from a set U Rm. The set U is
called the set of control parameters. Controls are of two types: open and closed loops. An
open loop control can be basically an arbitrary function u() : [0;+1) ?! U; for which the
equation
x_ (t) = f(x(t); u(t)); t 0; x(0) = x0 2 Rn; (1.0.2)
has a well dened solution.
A closed loop control can be identied with a mapping k : Rn ?! U, which may depend
on t 0, such that the equation
x_ (t) = f(x(t); k(x(t))); t 0; x(0) = x0 2 Rn; (1.0.3)
has a well dened solution. The mapping k() is called feedback. Controls are called also
strategies or inputs, and the corresponding solutions of (1.0.2) or (1.0.3) are outputs of the
system.
We do not consider all the system theory concepts here, we will concentrate mainly here
on controllability and stability of linear system. To motivate our approach we present a brief
survey of nite dimensional theory concepts and results which we will generalize later.
Linear System Theory A linear system is described by a (linear) dierential equation
x_ (t) = Ax(t) + Bu(t); t 0; x(0) = x0; (1.0.4)
where u is the control, x is the state. These functions take their values in linear spaces U
and X, respectively. Furthermore, A and B are linear mappings between appropriate spaces.
If the spaces U and X are nite dimensional, then the system is called nite dimensional.
Otherwise, we have an innite dimensional linear system.
1
1.1 Finite dimensional linear systems theory
Consider the linear nite dimensional control system:
x_ (t) = Ax(t) + Bu(t); t 0; x(0) = x0; (1.1.1)
where x0; x(t) 2 Rn, u(t) 2 Rm, the linear transformations A : Rn ?! Rn and B : Rm ?!
Rn will be identied with the representing matrices. System (1.1.1) is a dierential equation
on the state space Rn and the unique solution
x(t; x0; u) = eAtx0 +
Z t
0
eA(t?s)Bu(s) ds: (1.1.2)
The following concepts of controllability, stability and stablizability are now standard.
Controllability One says that a state x0 2 Rn is reachable (or attainable) from x1 in
time T; if there exists an open loop control u() such that, for the output x(), one has
x(0) = x0; x(T) = x1: If an arbitrary state x0 is reachable from an arbitrary state x1 in a
time T; then the system (1.1.1) is said to be controllable.
The proposition below gives a formula for a control transferring x0 to x1. In this formula
the matrix QT , called the controllability matrix or controllability Gramian, appears:
QT =
Z t
0
eA(T?s)B(s)eA(T?s)B(s) ds; T > 0;
where A is the transpose matrix of A. Then QT is symmetric and nonnegative denite.
Proposition 1.1.1. Assume that for some T > 0 the matrix QT is nonsingular. Then for
arbitrary x0; x1 2 Rn the control
^u(s) = ?BeA(T?s)Q?1
T (eA(T?s)x1 ? x0); s 2 [0; T];
transfers x0 to x1 at time T:
We now formulate algebraic conditions equivalent to controllability of (1.1.1).
Theorem 1.1.2. The folowing conditions are equivalent:
(i) An arbitrary state x1 2 Rn is attainable from 0.
(ii) System (1.1.1) is controllable.
(iii) System (1.1.1) is controllable at a given time T > 0:
(iv) Matrix QT is nonsingular for some T > 0.
(v) Matrix QT s nonsingular for an arbitrary T > 0.
(vi) rank

B : BA : BA2 : : BAn?1

= n:
Condition (vi) is called the Kalman rank condition or the rank condition for short.
2
Stability An important problem in the control of linear systems is the study of its sability.
Consider the stability problem for the linear system
x_ (t) = Ax(t); t 0; x(0) = x0 2 Rn and A : Rn ?! Rn: (1.1.3)
The system (1.1.3) is said to be assymptotically stable or strongly stable if for arbitrary
x0 2 Rn
lim
t!+1
kx(t; x0)k = 0;
and exponentially stable or uniformly stable if there exist positive constants M and such
that
kx(t; x0)k Me?tkx0k; t 0:
Instead of saying that (1.1.3) we will often say that the matrix A is stable. We have the
following well known result for nite dimensional linear system such as (1.1.3).
Theorem 1.1.3. The following condition are equivalent:
(i) System (1.1.3) is assymptotically stable.
(ii) System (1.1.3) is exponentially stable.
(iii) supfRe; 2 (A)g < 0:
(vi)
R +1
0 kx(t; x0)k2 dt < +1:
(v) The matrix equation
AQ + AQ = ?I (1.1.4)
has a nonnegative symmetric solution Q.
Equation (1.1.4) is called Lyapunov equation.
Stabilizability The central theme within the system theory is to design a control u such
that the corresponding state has desired behaviour. A typical example is stabilization:
Design an control u such that x(t) ! 0 as t ! +1: A control designed by feedback achieves
this goal. Feedback means that we do not calculate u only based on x0; A; and B but also
on the current state. This results in a control of the form u(t) = Dx(t); and the question of
stabilization turns into a question of nding D.
One says that the system (1.1.1) is stablizable if there exists an mn marix D such that
A + BD is stable.
1.2 Motivation
From nite to innite dimensional system To get an appreciation of the technical
problems associated with the control of innite dimensional systems, consider the distributed
control of wave motion. Let y(x; t) denote the transverse displacement at timt t 0 of
3
a vibrating medium in an n?dimensional bounded open region
with smooth boundary
@
Rn: Let us assume that
y(x; t) = 0; for x 2 @
and t 0
and let the initial data at time t = 0 be
y(x; 0) = y0 and
@
@t
y(x; 0) = y1;
for some suciently smooth functions y0 and y1 dened on
. Consider the partial dierential
equation
@2y
@t2 (t) + Ay(t) = Bu(t) (1.2.1)
or the equivalent rst order system
8>>><
>>>:
@y
@t
(t) ? z(t) = 0
@z
@t
(t) + Ay(t) = Bu(t);
(1.2.2)
where the operator
A := ?
Xn
i;j=1
@
@xi

aij(x)
@
@xj

+ a0(x); a0(x) > 0
is uniformly elliptic operator with C1?coecients in
, that is aij 2 C1(
). Let the
controller u() 2 L2(0;1;Rn) and let
B(x) :=

B1(x) Bm(x)

be an n m matrix with each column in C1(
). We consiedr the state space
w :=

y
z

2 W := H1
0(
)
L2(
);
where H1
0(
) denotes the usual Sobolev space of L2?functions, with derivatives, in the
distribution sense, belong to L2(
) and vanishing at the boundary. Then (1.2.2) can be
formally written as
dw
dt
(t) + ~ Aw(t) = ~B u(t); (1.2.3)
where
A~ =

0 ?I
A 0

and ~B =

0
B

:
Here ~B2 L(Rm;W) and the operator ~ A is an unbounded opertor with a dense domain
D(A~) = [H1
0(
) H2(
)]
H1
0(
) W:
4
Because of the presence of the unbounded operator A~; it is clear that the concept of a
solution for (1.2.3) is not immediate. Intuitively, if we want (1.2.3) to have classical solution,
then we would need
w0 =

y0
z0

2 D(A~)
and u() 2 C1(
): On the other hand, ?A~ generates a strongly continuous semigroup
(S(t))t0 on W, i.e., S(t) is a bounded linear opearator on W satisfying
(i) S(0) = I.
(ii) S(t1 + t2) = S(t1)S(t2); 0 < t1; t2 < +1:
(iii) t 7?! S(t)w : [0;+1) ?! W is continuous for each w 2 W:
Then we say that w(t) is a solution of (1.2.3) if it satises
w(t) = S(t)w0 +
Z t
0
S(t ? s)~B u(s) ds; (1.2.4)
where the integral is interpreted in the Bochner sense.
Now, given a strongly continuous semigroup S(t) on X (say a Banach space), it has a
unique innitesimal generator A, a closed unbounded operator that is dened on some dense
domain D(A). The converse question, namely, when does A generate a strongly continuous
semigroup, is a far more dicult issue and is the content of the Hille-Yosida theorem. Furthermore,
there are dierent kinds of semigroups, and each plays an important role in the
study of controllability and stability of innite dimensional systems.
1.3 Organization of the work
The project is divided into two parts. Firstly, a general framework for the concepts of
controllability and stability of linear systems in a Hilbert spaces is developed. Secondly, the
concepts of controllability and stability of linear system in a Banach space is discussed.
Chapter 2
In chapter 2 we review some basic concepts of spectral theory and semigroup of linear
operators, all the results discussed in this chapter are preliminary and can be found in any
materials on the subject. The materials follows from Khalil Ezzinbi [3]; Klaus-Jochen Engel
and Rainer Nagel [5]; R. F. Curtain and H. J. Zwart [6]; and Zheng-Hua Luo, Zhu Guo and
Ömer Mörgul [8].
Chapter 3
Chapter 3 is dealed with the controllability and stabilizability of linear systems in Hilbert
spaces. A general framework of concept of controllability of linear systems with bounded
5
control is discussed and then the various concepts of controllability and sabilizability of
linear systems and the the relationships between them is stated. almost all the results in
this chapter are from A. J. Pritchard and T. Zabczyk [1]; Alain Bensoussen, Guiseppe Da
Prato, Michel C. Delphour, Sanjoy K. Mitter [2]; Jerzy Zabczyk [4] and Ruth F. Curtain
and Anthony J. Pritchard [7].
6

GET THE COMPLETE PROJECT»

Do you need help? Talk to us right now: (+234) 8111770269, 08111770269 (Call/WhatsApp). Email: [email protected]

IF YOU CAN’T FIND YOUR TOPIC, CLICK HERE TO HIRE A WRITER»

Disclaimer: This PDF Material Content is Developed by the copyright owner to Serve as a RESEARCH GUIDE for Students to Conduct Academic Research. You are allowed to use the original PDF Research Material Guide you will receive in the following ways: 1. As a source for additional understanding of the project topic. 2. As a source for ideas for you own academic research work (if properly referenced). 3. For PROPER paraphrasing ( see your school definition of plagiarism and acceptable paraphrase). 4. Direct citing ( if referenced properly). Thank you so much for your respect for the authors copyright. Do you need help? Talk to us right now: (+234) 8111770269, 08111770269 (Call/WhatsApp). Email: [email protected]

[ad_2]


Purchase Detail

Hello, we’re glad you stopped by, you can download the complete project materials to this project with Abstract, Chapters 1 – 5, References and Appendix (Questionaire, Charts, etc) for N4000 ($15) only, To pay with Paypal, Bitcoin or Ethereum; please click here to chat us up via Whatsapp.
You can also call 08111770269 or +2348059541956 to place an order or use the whatsapp button below to chat us up.
Bank details are stated below.

Bank: UBA
Account No: 1021412898
Account Name: Starnet Innovations Limited

The Blazingprojects Mobile App



Download and install the Blazingprojects Mobile App from Google Play to enjoy over 50,000 project topics and materials from 73 departments, completely offline (no internet needed) with the project topics updated Monthly, click here to install.

0/5 (0 Reviews)
Read Previous

Automatic In Business Organization – Complete project material

Read Next

Assessment Of The Impact Of Power Outages On Commercial Consumers (A Case Study Of Coldrooms Consumers At Trans-Amadi Area, Port- Harcort) – Complete project material

Need Help? Chat with us