CONSTRUCTION OF A STANDARD BAKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS) – Complete Project Material

[ad_1]

CONSTRUCTION OF A STANDARD BAKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
CONSTRUCTION OF A STANDARD BAKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)

ABSTRACT
This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about energy specially the conversions of electrical energy to thermal energy, conduction and conventional heat transfer etc.
Also the determination of the properties of various ferrous and non-ferrous materials, electrical installation occults. The application of engineering measurement and quality control.
Also to build an intellectual ability in interpretation of working drawing in designing and development before and after working process. Students will get an opportunity to appreciate safety, and the use of both machine and hand tools in the course of working.
TABLE OF CONTENT CHAPTER ONE BACK GROUND
1.1.0 Objective of project
1.2.0 Importance
1.3.0 Limitations
CHAPTER TWO LITERATURE REVIEW
2.1.0 History of ovens
2.2.0 Types of oven
2.2.1 Conventional/standard oven
2.2.2 Fan forced oven
2.2.3 Microwave oven
2.2.4 Multi-functional oven
2.2.5 Solar oven
2.3.0 Mode of oven operation
2.3.1 Electrical section
2.3.2 Gas section
CHAPTER THREE
3.1.0 SAMPLE ACTIVITIES
3.1.1 Sequence of activities during operation
3.2.0 Summary of events
3.3.0 Graphic illustration
F.G.1.1 Obilique projection
F.G.1.2 Ontograhic projection
F.G.1.3 Sectional view
F.G.1.4 Circuit Diagram
CHAPTER FOUR
4.1.0 MATERIAL METROLOGY
4.1.1 Materials and Reasons for use
4.1.2 Behaviour of mild steel when heated
4.1.3 Graphic of heating and cooling curves for mild steel
4.2.0 Working tools use for project
4.1.0 Bill of Quantities
CHAPTER FIVE
5.1.0 Performance and evaluation of oven
5.2.0 Care and maintenance
5.3.0 Standards and symbols
5.4.0 Reading
5.5.0 Combustion of methane gas
5.6.0 Conclusion and recommendation
Bibliography
CHAPTER ONE BACKGROUND

1.1.0 OBJECTIVES
This project is undertaken to
(1) Compare the various ways used in the production of an electric and gas oven.
(2) Disclose the different types of process in the manufacturing of an electric oven and also a gas oven in the past in comparison to the morden days method.
(3) Exploit the local facilities available in the construction of the oven as against imported ovens.
(4) To exhibit the usefulness of a dual-purpose oven in the economy and technology growth of the nation.
(5) To know the convenience in the use of alternate power source for operation of ovens.
(6) Discover the basic principle involved in the design and maintenance of a dual purpose oven.
1.2.0 IMPORTANCE OF OVENS
In actual analytical enunciation an oven is an enclosed chamber in which things are heated or cooked with various sources of power.
Its importance borders around its function, which are as follows;
(i) It is used to meet the everyday basic need of cooking, (baking, toasting, gritting, toasting) of food materials for human consumption.
(ii) Ovens are used for heat treatment of substance in laboratories and industries.
(iii) Also as a means of preservation by heat application to perishable materials (organic and inorganic) in general.
(iv) Sterilization of instruments and equipment for industrial use is done by heat application using oven.
(v) Expelling of moisture content to a required measure in some substance is also done using oven.
(vi) Early manufactured ovens where used as a source of room heaters during cold weathers in cold climates.
Other importance boarding around its energy source is that the use an alternative source of energy when either fossil fuel or electricity is not available. This can be relatively save cost when necessitated.

Request Complete Work Here

[ad_2]


Purchase Detail

Hello, we’re glad you stopped by, you can download the complete project materials to this project with Abstract, Chapters 1 – 5, References and Appendix (Questionaire, Charts, etc) for N5000 ($15) only,
Please call 08111770269 or +2348059541956 to place an order or use the whatsapp button below to chat us up.
Bank details are stated below.
Bank: UBA
Account No: 1021412898
Account Name: Starnet Innovations Limited

The Blazingprojects Mobile App



Download and install the Blazingprojects Mobile App from Google Play to enjoy over 50,000 project topics and materials from 73 departments, completely offline (no internet needed) with the project topics updated Monthly, click here to install.

0/5 (0 Reviews)
Read Previous

ANALYSIS OF THE EFFECTIVENESS OF INFORMATION TECHNOLOGY ON BANKING SERVICES DELIVERY (A CASE STUDY OF UNION BANK ENUGU) – Complete Project Material

Read Next

An Assessment Of The Impact Of Manufacturing Sector On Economic Growth In Nigeria – Complete Project Material

Need Help? Chat with us