[ad_1] COMPARING THE STRENGTH AS BLOCKS MADE FROM CEMENT AND LATERITE SOIL CEMENT AND RED EARTH LATERITE, SAND AND RED EARTH ABSTRACT This case study is “comparing the strength of blocks made from: cement stabilized…
Read More[ad_1] COMPARATIVE ANALYSIS OF THE STRENGTH OF CONCRETE MADE FROM VARIOUS AGGREGATE CHAPTER ONE 1.1 INTRODUCTION This work was to present in one weight, the fundamental and practical information in the field of the comparative…
Read More[ad_1] THE RELEVANCE OF ROAD TO LIFE AND IT’S ACTIVITIES ABSTRACT This project involves the route survey which includes: reconnaissance survey, theodolite traversing and leveling operations as well as soil tests which includes; plastic limit…
Read More[ad_1] INVESTIGATION ON THE CAUSES OF PAVEMENT FAILURE ABSTRACT One of the major problems facing the country is pavement failure. It is the concern of the Institute of Management and Technology (IMT) authorities to carryout…
Read More[ad_1] STRUCTURAL DETAILING IN REINFORCED CONCRETE OF A THREE BEDROOM DETACH DUPLEX PREFACE In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required…
Read More[ad_1] GLYCERINE RECOVERY FROM SPENT SOAP LYE ABSTRACT The recovery of glycerine from spent soap lye has been done using soap lye samples obtained from the hot process of soap production using palm kernel oil…
Read More[ad_1] EFFECT OF INTERFACE ON THE QUALITY OF PETROLEUM PRODUCT IN MULTI PURPOSE PIPELINE SYSTEM ABSTRACTInterface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where mixing…
Read More[ad_1] DEHYDRATION OF ETHANOL WATER SOLUTION USING ACTIVATED STARCH ABSTRACT This project research work was based on dehydration of ethanol water solution using activated starch. The extracted starch obtained was of whistler method. The starch…
Read More[ad_1] PROCESS AND QUALITY FACTORS IN LAUNDARY AND TOILET SOAP PRODUCTION ABSTRACTThis projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the…
Read More[ad_1] REPORT ON FABRICATION OF FLOW NOZZLE ABSTRACT The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) recommendation. Throat diameter 42.5mm Length converging nozzle 68mm Thickness of…
Read MoreBank: UBA
Account No: 1021412898
Account Name: Starnet Innovations Limited
USDT: Pay 20 USDT to TJuqbcZ1GVibKqUPcmeYPZxX1Gq2QS
Recent Comments